How To Remove Harmful Substances From Wooden Pallets

  After preparing the raw materials in advance, we will carry out production according to the customer's requirements and designs, and nail the nails accurately to ensure that there will be no missing nails or nails, and to ensure that every board and every pier can work hard. The wooden pallet will be polished in the middle and later stages. , to avoid burrs and other situations. Strip the roots of the wood, either with a technical wood stripper or with the hydroelectric method.

  You can choose high-quality miscellaneous wood, fir and other raw materials, and cut the wood into wood segments. The peeled wood is cut vertically and horizontally with a laser to make boards. According to the thickness and total width of the wooden pallet, generally speaking, the thickness is between 15-25 mm and the total width is between 80-90 mm. The key is to Follow the regulations for wooden pallets.

  Drying raw materials is a very important process. After drying, the precision and compressive strength of the wood will be further improved, and the wood can effectively prevent mold, rot, cracking and growth.

  Test the board to see if there are any defects. Springtails are raw materials that cannot be used; in fact, the growth and development of bacteria have some environmental rules, the appropriate temperature for growth and development, and sufficient CO2 supply. The nutrients suitable for bacterial growth and development are Indispensable water, each of these four environmental factors will immediately prevent or block the growth and development of bacteria.

  Why do wooden pallets deform?

  The deformation of wooden pallets has nothing to do with product quality, but is related to the installation quality and use environment. The deformation of wooden pallets is a typical characteristic of the environment.

  The wider the wooden pallet, the greater the deformation after getting wet. For example, under the same conditions, the chord height of a wooden pallet with a width of 92mm is 1.0mm, and the chord height of a wooden pallet with a width of 125mm is 1.3mm. The deformation of the wooden pallet is Due to the moisture absorption of wooden pallets, due to the hygroscopic hysteresis of wood, the moisture content of wooden pallets is approximately lower than the equilibrium moisture content of the environment, and the deformation is not obvious. Moreover, the lower the moisture content of the wooden pallet, the more water it absorbs and the greater the deformation. When the moisture content of the wooden pallet is the same or similar to the equilibrium moisture content of the environment, the moisture content of the wooden pallet does not change much, and the wooden pallet is not easy to deform. This is the wooden pallet. Causes of pallet deformation.